Skip to product information
1 of 1

Wilco Offroad

Wilco Offroad Hitchswing

Wilco Offroad Hitchswing

SKU:WILC-HS32220

Regular price $957.00 USD
Regular price Sale price $957.00 USD
Sale Sold out

The Hitchswing adds a secondary 2” receiver hitch mated to a swinging arm. Slide into the Hitchswing your favorite bike rack, cargo rack, or whatever rack, pull the pin, and swing that entire load away from your vehicle. Boom! The rear hatch, tailgate, or door is free again! Now you don’t have to decide between stuff on the hitch or accessing the cooler at the gas station again.

  • Hitch mounted bike racks are a godsend, but usually, that means opening the rear for a trip to the local hardware store is mostly off-limits or at least compromised.
  • Hitch mounted cargo racks are spectacular for family road trips, but usually, that means waiting for 12 hours to get into the rear of the vehicle again.

SPECS

  • Hitchswing features the same secondary receiver as our Hitchgate™ line, tow-rated at 7,500 lbs (max trailer weight) and 750 lbs (tongue weight). Not every trailer will be compatible with the full range of motion of the Hitchswing. Not every vehicle will have the same capacity as the Hitchswing. ALWAYS adhere to your vehicle’s maximum limits.
  • 30″ wide from hitch to pivot bolt, 3.5″ minimum depth from 1st hitch pin to the back of support arm. 4.5″ to the next hitch pinhole. The hitch swing support arm sits at hitch height, rising only 2.5″ above the receiver. The swingarm sits above the support arm approx. 6″.]
  • 4.5″ of clearance is required from the center of the hitch pin hole rearward for it to be compliant with the wedge lock system. You may need to relocate the spare tire from underneath or modify it to gain the necessary clearance.
  • WEIGHT LIMITS: The further your load extends from the Hitchswing, the lighter your load needs to be. If your load is within 3 feet(Or 18″ from hitch to the center of load) of the Hitchswing, the max. load is 250lbs. If your load extends beyond 4 feet(Or 24″ from hitch to the center of load), the limit drops to 150lbs. The further away the load is from Hitchswing the heavier the load is on it AND your vehicle.

ACCESSORIES

  • License Plate Relocation Bracket (no light included) LPR32204
  • License Plate LED Light LPL1468 
  • Master Lock Locking Hitch Pin 1480DAT
  • Master Lock Locking Hitch Pin Extended Length 1469DAT (recommended for 2.5″ hitches and Tacoma/Tundra)

***Fitment Notes***

  • The rectangular support arm is welded to a secondary hitch extending 2.5″ above the factory hitch and 30″ out horizontally from your vehicle’s hitch.
  • When properly installed, the Hitchswing will sit level the inside of the hitch…if your bumpers arc upward at the corners, the Solo may appear not to follow those body lines as it is mated up to the hitch rather than the bumper. This is *not* a warranty situation.
  • Hitchswing will interfere with factory backup sensors and reduce the scope of vision of a backup camera. 
  • 4.5″ of clearance is required from the center of the hitch pin hole rearward for it to be compliant with the wedge lock system. You may need to relocate the spare tire from underneath or modify it to gain the necessary clearance.


View full details

Collapsible content

What's in the Box

Warranty Information

RalliTEK BRANDED PRODUCTS LIFETIME WARRANTY

RalliTEK branded products are warranted to the original owner against manufacturing defects in materials and workmanship for the lifetime of the product.

If a RalliTEK branded product covered by this warranty fails due to a manufacturing defect we will repair the product, without charge, or replace it at our discretion. This policy covers only original, unaltered, and unmodified materials and workmanship. This warranty does not cover damage caused by incorrect installation, accident, improper care, negligence, normal wear and tear, or the natural breakdown of colors and materials over extended time and use. Damage not covered under warranty may be repaired for a reasonable rate and a fee will be charged for return shipping.

For warranty evaluation, please contact RalliTEK Customer Service at (503) 619.0055 or info@rallitek.com to obtain a return authorization. Once this step has been completed, your product must be returned directly to the RalliTEK Warranty Department, 13339 NE Airport Way, Suite 500, Portland, OR 97230. All shipping to the Warranty Department must be pre-paid and insured. RalliTEK will not be liable for damaged or lost inbound packages.

      NOTThis warranty is only available within the United States or Canada

  • This warranty gives you specific legal rights; you may have other rights, which vary from state to state.
  • This warranty does not cover products sold by RalliTEK that are not RalliTEK branded products.

The RalliTEK website sells discontinued, special markup, and slightly blemished products at significant discounts as 'factory seconds' products. This warranty does not automatically cover products purchased as factory seconds. RalliTEK reserves the right to determine if any warranty applies on a case-by-case basis for factory second parts. If approved, the RalliTEK Warranty Department may repair factory second products for a reasonable charge and applicable shipping charges.

MANUFACTURER WARRANTIES (FOR NON-RALLITEK BRANDED PRODUCTS)

Non-RalliTEK branded products do not have any written or implied warranties. Products on RalliTEK.com are sold with the warranty applied directly from the manufacturer. The customer must contact the product brand manufacturer for any warranty details. All products sold by RalliTEK are intended for off-road and/or race use only, as suggested by the manufacturer, and should be installed and set up by professional service centers only. RalliTEK is not responsible for any product failure or failure due to installation. Should a warranty claim arise, the customer and the manufacturer will handle all warranty issues directly.

There is no warranty on high-performance or race-related parts due to the nature of usage.

No payment or reimbursement shall be made for installation, removal, transportation, or other charges. The remedies outlined in this instrument are exclusive and the liability of RalliTEK with respect to any sale shall not exceed the price of the product on which the liability is based.

EXCEPT AS STATED OTHERWISE IN THIS WARRANTY, RalliTEK MAKES NO WARRANTIES, EXPRESS OR IMPLIED, INCLUDING WITHOUT LIMITATION, ANY WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE.

Some states do not allow limitations on how long an implied warranty lasts, so the above limitation may not apply to you. RalliTEK shall not, in any case, be liable for special, incidental, consequential, indirect, or other similar damages arising from any breach of these warranties even if RalliTEK or its agent has been advised of the possibility of such damages. Some states do not allow the exclusion or limitation of incidental or consequential damages so the above limitation or exclusion may not apply to you. This warranty is governed by the laws of the State of Oregon.

Installation Instructions

Applications

Frequently Purchased Together